Home > Products > Flow Monitoring & Alarms > Vortex Flowmeter > KP-CWD80 Series

KP-CWD80 Series

Clamped Vortex Flowmeter

The KP-CWD80 vortex flowmeter uses new sanitary lining materials and lining technology to meet the hygienic requirements of the food industry. At the same time, the stainless steel clamp connection is used to facilitate the rapid disassembly and cleaning of the vortex flowmeter, which is not easy to be polluted during use, and can effectively prevent the accumulation of measurement liquid residues in the measuring tube, and can be widely used in mineral water, soy sauce, jam, beer, fruit juice, rice wine, milk and other food and pharmaceutical manufacturing processes, as well as health, chemical and other fields.

Specification

Performance Features

The basic principle of the KP-CWD80 series clamped vortex flowmeter is the Carmen vortex phenomenon. When the medium flows through a triangular cylinder-shaped vortex generator at a certain speed, two alternating rows of vortices are formed on its two sides, the vortex is called the Kármán Vortex Street. Strouhal built on the Carmen vortex theory by suggesting that the frequency of the Carmen vortex is proportional to the velocity of the fluid.

Corrosion-resistant stainless steel material, ABS full mold production probe, simple structure.

The detection sensor does not directly contact the measured medium, the performance is stable, and the life is long.

The output is a pulse signal proportional to the flow, without zero drift and with high precision.

Low pressure loss, low operating cost, more energy-saving significance.

The volumetric and mass flow rates of steam, gas and liquid can be measured.

The amplifier can be separated from the sensor (separation distance 15m) .

The use of noise elimination circuit and anti-vibration sensor head, so that the instrument has a certain anti-environmental vibration performance.

The pressure loss is small, the range of measurement is wide, the range is 10-40 times.

The temperature of the measurable medium reaches + 350 ° C

No mechanical moving parts, long-term stability, simple structure for installation and maintenance.

The output of the sensor is a pulse frequency, its frequency is linear with the actual flow of the measured fluid, zero drift, performance is very stable.

The adoption of RS-485 communication, or Hart communication, can realize factory automation, integration.

Application:
KP-CWD80 series clamp type vortex flowmeters are widely used to measure volume and mass flows of superheated steam, saturated steam, Compressed air and general gases and liquids.

Technical parameters

Measuring Range	Liquid: 0.35 ~ 7.0 m/s gas: 5.0 ~ 60.0 m/s steam: 6.0 ~ 70.0 m/s
Suitable medium	Ordinary gases, saturated vapors, superheated vapors, Compressed air, ordinary liquids
Nominal pipe diameter	DN15-300MM (flange, clamp)
Nominal pipe diameter	DN250-1800MM (insert)
Accuracy Level	± 0.5% FS、 ± 1.0% FS、 ± 1.5% FS、 ± 2.5% FS
Repeatability error	± 0.5% of the measured value
Range ratio	8:1 10:1 15:1
Display	Widescreen LCD display, parameters and variables can be set through the panel keys (with password protection)
	Instantaneous flow display, cumulative total display, percentage display, frequency display
	M3/h、 kg/h、 t/h、 Hz
Operating Temperature	-40-130 ° C (standard)
	-40-350 ° C (high temperature type)
	-40-80 ° C (explosion-proof)
Damping adjustment	0-50
Job Stress	1.6 mpa, 2.5 mpa, 4.0 mpa, special can be customized
Shell material	Stainless steel, cast aluminum alloy
Straight pipe section requirements	Entry: 15 * DN
Straight pipe section requirements	Export: 5 * DN
Signal output	4-20mA, Pulse, RS485, Modbus protocol, Hart output
Power Supply	Pulse output: 12V DC, 24V DC (optional)
	Two-wire system 4-20mA: 24V DC (with Hart Communication)
	With 3.6 V lithium battery, service life of more than 2 years
Electrical Connection	M20 * 1.5 terminal wiring
Connection mode	Standard flange, clamp, internal and external threads
Protection level	IP65(optional IP67)
Ambient temperature	– 30 degrees.-30 degrees. 60 degrees C…40 degrees C… 85 ° C (non-explosion-proof) , sensor-40 ° C… 80 ° C, converter-15 ° C… 60 degrees C
Relative humidity	5%～95%
Explosion-proof signs	Explosion-proof ExdIICT5
Consume power	＜20W

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

Mode KP-DSDO750 Principle of measurement Fluorescence method Range 0～20mg/L(0～200% saturation，25℃) Resolution 0.01mg/L，0.1℃ Accuracy ±2% of the measured value, or ±0.3mg/L, whichever is greater Temperature compensation

KP-DIS650

Brand KIEL PLANCK Measure rangge 1～14pH Resolution 0.01pH Accuracy ±0.1pH Operating temperature 0～65℃(0～100℃ optional） Working pressure <0.2MPa Power supply 12～24VDC±10% Signal output Rs485(Modbus/RTU) Liquid connection

Not sure which Instruments and sensors to choose?

Kilplanck has a number of distributors and a marketing team of more than 100 people covering the global market, providing customers with comprehensive service and support.

Get a product quote

Fill in our quote request form and we will reply to your message as soon as possible! Or send us an email at: info@kielplanckprc.com / kielplanck@outlook.com

New Product

Your benefits

KP-CWD80 Series

KP-CWD80 Series

Clamped Vortex Flowmeter

Specification

Performance Features

Technical parameters

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

KP-DIS650

Not sure which Instruments and sensors to choose?

Get a product quote

Contact Us

Products

Application

Service & Support

Brand Overview