KP-EKUD50Series

– Measurement accuracy: /-2.0% (0.03m/s – 5.0m/s)
– Flow velocity range: 0.1 m/s – 5.0 m/s
– Linearity: /-2.0% (0.03m/s – 5.0m/s)
– Repeatability: 0.8%
– Response time: 500ms
– Menu language: Chinese Simplified, Chinese Traditional, English
– Display Units: Support metric and imperial unit selection; m³/h, LPM, ml/min, GPM, LPH, the factory default unit is m³/h
– Display data: instantaneous flow, instantaneous flow rate, net accumulation, single accumulation, daily maximum, daily minimum, and daily year-month accumulation
– Accumulator: 7-bit flow accumulator
– Cumulative data: 10 years, 64 months, 64 days
– Operation buttons: 4 touch buttons
– Calendar battery: CR1220
– Power configuration: 24VDC/3W
– Analog output: 4 – 20mA, maximum load 600Ω
– Communication interface: RS485, support Modbus RTU communication protocol
– Alarm output: OCT upper and lower limit alarm output, pulse output, etc. (option)
– Non-electrical output: (optional) 30VDC/1A, switching frequency less than 2Hz
– Applicable medium: water, solution, chemical reagent (impurities≤ 4%, etc.)
– Waterproof rating: IP54/IP65
– Installation: The external card is integrated, and the upper and lower cards and the main unit are tightened by screws
– Pipe diameter: DN015 – DN040
– Measuring material: non-contact
– Medium temperature: one-piece: -10°C – 50°C
– Ambient temperature: -10°C – 50°C
– Ambient humidity: 0 – 95% relative humidity, no condensation
– Viscosity: <300CST (mm²/s)