Home > Products > Flow Monitoring & Alarms > Gas Mass Flow Meter And Controller > KP-HG150 Series

KP-HG150 Series

Sanitary Gas Mass Flow Meter

KP-HG150Sanitary Gas Mass Flow The meter is a flow meter designed with the principle of thermal diffusion. The surface roughness Ra≤0.4μm, which is in line with food The hygienic requirements of the industry, and the stainless steel clamp connection is adopted to facilitate the electromagnetic flowmeter. Quick disassembly and cleaning , so that the electromagnetic flowmeter is not easy to be polluted during use, has the characteristics of high measurement accuracy, wide measurement range, easy installation, high temperature resistance, etc., Moving parts in the tube, vibration effects It can be ignored, and the product is displayed with a display, which is convenient for observation.

Specification

Performance Features

KP-HG150Sanitary Gas Mass Flow MeterBased onthermal spread The flow meter is designed based on the principle. That is, when the fluid flows through the heating object, the heat loss of the heating object is proportional to the flow rate of the fluid.
The sensors of this series of flowmeters have two standard-grade RTDs, one for As a heat source, one is used to measure the temperature of the fluid.
When the fluid flows, the temperature difference between the two has a linear relationship with the flow rate, and then through the microelectronic control technology, this relationship is converted into a linear output of the measured flow signal.

■ surface roughness Ra ≤0.4μm, symbolin line with the hygiene of the food industry Requirements

■ Easy installation, simple maintenance, two-way detection, anti-vibration

■ Simultaneous detection of flow and temperature, switching display

■ Large diameter and small flow measurement, can be used for leak detection

■ Direct mass flow detection without temperature and pressure compensation

■ Using SMD devices and surface mount (SMT) technology, high circuit reliability ;

■ The range can be modified online according to the actual needs of users on site to better match the acquisition terminal match;

■ Using RS-485 communication, or HART communication, can realize factory automation and integration

■ With self-diagnosis and self-diagnosis and alarm functions;

■ Ultra-low EMI switching power supply, suitable for a wide range of power supply voltage changes, anti-EMI performance it is good.

Technical parameters

measurement range	0.05-90m/S
Available medium	all gases compatible with stainless steel
nominal diameter	DN15-2000
precision class	0.5%FS, 1%FS
Reproducibility Error	±0.25% of measurement
turndown	100:1
display	Wide-screen LCD display, parameters and variables can be set by buttons on the panel (with password protection)
operating temperature	-40-100℃ (standard), -40-350℃ (for enquiry)
work pressure	<6.0MPa
surface roughness	Ra≤0.4μm
Shell Material	stainless steel, cast aluminum alloy
sensor material	316L, Tantalum, Hastelloy, Titanium
Liquid texture	Cover 316G stainless steel (standard), Hastelloy
two-way measurement	yes
Signal Out	4～20mA, RS485, MODBUS protocol, HART output< /span>
response time	≤850ms
Power Supply	24V DC current≥350mA
Electrical connections	M20*1.5 terminal wiring
Connection	GB flange, chuck, clamp
Protection level	IP65 (optional IP68)
ambient temperature	-35～+70℃ Humidity＜90%RH< /span>
RH	5%～95%
Total power consumption	less than 15W

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

Mode KP-DSDO750 Principle of measurement Fluorescence method Range 0～20mg/L(0～200% saturation，25℃) Resolution 0.01mg/L，0.1℃ Accuracy ±2% of the measured value, or ±0.3mg/L, whichever is greater Temperature compensation

KP-DIS650

Brand KIEL PLANCK Measure rangge 1～14pH Resolution 0.01pH Accuracy ±0.1pH Operating temperature 0～65℃(0～100℃ optional） Working pressure <0.2MPa Power supply 12～24VDC±10% Signal output Rs485(Modbus/RTU) Liquid connection

Not sure which Instruments and sensors to choose?

Kilplanck has a number of distributors and a marketing team of more than 100 people covering the global market, providing customers with comprehensive service and support.

Get a product quote

Fill in our quote request form and we will reply to your message as soon as possible! Or send us an email at: info@kielplanckprc.com / kielplanck@outlook.com

Name

Phone/WhatsApp

Country

Product

Captcha

Message

Contact Us

Hotline:400-8868-261

E-mail:info@kielplanckprc.com , kielplanck@outlook.com

Address：No. 39, Lane 4078, Cao’an Road, Jiading District, Shanghai, China

We look forward to your inquiry.

Leave a messages

Kilplanck has a number of distributors and a marketing team of more than 100 people covering the global market, providing customers with comprehensive service and support.

New Product

Your benefits

KP-HG150 Series

KP-HG150 Series

Sanitary Gas Mass Flow Meter

Specification

Performance Features

Technical parameters

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

KP-DIS650

Not sure which Instruments and sensors to choose?

Get a product quote

Contact Us

Leave a messages

Your contact information

Products

Application

Service & Support

Brand Overview