Home > Products > Flow Monitoring & Alarms > Vortex Flowmeter > KP-HPWJT Series

KP-HPWJT Series

Temperature And Pressure Compensation Vortex Flowmeter

KP-HPWJT series clamp vortex flowmeter is based on Carmen Vortex principle research and production of measuring gas, steam flow, pressure loss is small, using a special temperature and pressure compensation technology, large range, high accuracy, the volume flow rate is almost not affected by the parameters of fluid density, pressure, temperature, viscosity and so on. The use of piezoelectric stress sensors, high reliability, low maintenance, IP68 protection grade, suitable for installation in any outdoor piping system. There are analog standard signals, but also digital pulse signal output, easy to use with the computer and other digital systems.

Specification

Performance Features

The basic principle of the KP-HPWJT series temperature-pressure compensated vortex flowmeter is the Carmen vortex phenomenon. When the medium flows through the vortex generator of a triangular cylinder at a certain speed, two alternating rows of vortices are formed on its two sides, the vortex is called the Kármán Vortex Street. Strouhal built on the Carmen vortex theory by suggesting that the frequency of the Carmen vortex is proportional to the velocity of the fluid.

Using double bluff body vortex flow sensor technology, differential double piezoelectric sensor technology, wide range, low flow limit, strong anti-interference ability, accurate and reliable measurement.

Use of micro-power consumption and high-tech, with both internal and external power supply can work, internal battery can be used for more than five years .

LCD display of instantaneous flow rate and cumulative flow rate for clear and intuitive display and convenient reading.

Compared with the screw-type flowmeter, the pressure loss is smaller, suitable for the use of lower pressure occasions.

No mechanical rotating parts, high reliability, good stability, less maintenance, good adaptability to media

The wireless data transmission of GPRS can be realized through RS485 interface and data collector, which is reliable and convenient for automatic management.

The meter head can be rotated at will with 180 ° , and the installation is convenient.

Application:Chemicals, food and paper

Application:Sugar making, mining, water supply and drainage

Application:Environmental Protection, Water Conservancy, Steel

Application:Petrochemicals, oil fields and pharmaceuticals

Application:In areas such as textiles and hotels

Technical parameters

Measuring range	Liquid: 0.35 ~ 7.0 m/s gas: 5.0 ~ 60.0 m/s steam: 6.0 ~ 70.0 m/s
Suitable medium	Ordinary gases, saturated vapors, superheated vapors, Compressed air, ordinary liquids
Nominal pipe diameter	DN15-300MM (flange, clamp)
Nominal pipe diameter	DN250-1800MM (insert)
Accuracy level	± 0.5% FS、 ± 1.0% FS、 ± 1.5% FS、 ± 2.5% FS
Repeatability error	± 0.5% of the measured value
Range ratio	8:1 10:1 15:1
Display	Widescreen LCD display, parameters and variables can be set through the panel keys (with password protection)
	Instantaneous flow display, cumulative total display, percentage display, frequency display
	M3/h、 kg/h、 t/h、 Hz
Operating temperature	-40-130 ° C (standard)
	-40-350 ° C (high temperature type)
	-40-80 ° C (explosion-proof)
Damping adjustment	0-50
Job stress	1.6 mpa, 2.5 mpa, 4.0 mpa, special can be customized
Shell material	Stainless steel, cast aluminum alloy
Straight pipe section requirements	Entry: 15 * DN
Straight pipe section requirements	Export: 5 * DN
Signal output	4-20mA, Pulse, RS485, Modbus protocol, Hart output
Power supply	Pulse output: 12V DC, 24V DC (optional)
	Two-wire system 4-20mA: 24V DC (with Hart Communication)
	With 3.6 V lithium battery, service life of more than 2 years
Electrical connection	M20 * 1.5 terminal wiring
Connection mode	Standard flange, clamp, internal and external threads
Protection level	IP65(optional IP67)
Ambient temperature	– 30 degrees.-30 degrees. 60 degrees C…40 degrees C… 85 ° C (non-explosion-proof) , sensor-40 ° C… 80 ° C, converter-15 ° C… 60 degrees C
Relative humidity	5%～95%
Explosion-proof signs	Explosion-proof ExdIICT5
Consume power	＜20W

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

Mode KP-DSDO750 Principle of measurement Fluorescence method Range 0～20mg/L(0～200% saturation，25℃) Resolution 0.01mg/L，0.1℃ Accuracy ±2% of the measured value, or ±0.3mg/L, whichever is greater Temperature compensation

KP-DIS650

Brand KIEL PLANCK Measure rangge 1～14pH Resolution 0.01pH Accuracy ±0.1pH Operating temperature 0～65℃(0～100℃ optional） Working pressure <0.2MPa Power supply 12～24VDC±10% Signal output Rs485(Modbus/RTU) Liquid connection

Not sure which Instruments and sensors to choose?

Kilplanck has a number of distributors and a marketing team of more than 100 people covering the global market, providing customers with comprehensive service and support.

Get a product quote

Fill in our quote request form and we will reply to your message as soon as possible! Or send us an email at: info@kielplanckprc.com / kielplanck@outlook.com

New Product

Your benefits

KP-HPWJT Series

KP-HPWJT Series

Temperature And Pressure Compensation Vortex Flowmeter

Specification

Performance Features

Technical parameters

Related Products Recommendation

KP-AFW801

KP-DK105 Series

KP-DSDO750

KP-DIS650

Not sure which Instruments and sensors to choose?

Get a product quote

Contact Us

Products

Application

Service & Support

Brand Overview